Low shear rheological behaviour of two-phase mesophase pitch

The low shear rate rheology of two phase mesophase pitches derived from coal tar pitch has been investigated. Particulate quinoline insolubles (QI) stabilised the mesophase spheres against coalescence. Viscosity measurements over the range 10–10⁶ Pa s were made at appropriate temperature ranges. Increasing shear thinning behaviour was evident with increasing mesophase content. At low mesophase contents the dominant effect on the near Newtonian viscosity was temperature but at higher contents it was the shear rate; temperature dependence declined to near zero. The data indicated that agglomeration could be occurring at intermediate mesophase volume fractions, 0.2–0.3. The Krieger–Dougherty function and its emulsion analogue indicated that in this region the mesophase pitch emulsions actually behaved like ‘hard’ sphere systems and the effective volume fraction was estimated as a function of shear rate illustrating the change in extent of agglomeration. At the higher volume fractions approaching the maximum packing fraction, which could only be measured at higher temperatures, the shear thinning behaviour changed in character and it is considered that this is possibly due to shear induced deformation and breakup of dispersed drops in the shear field.     

Large piezoelectricity and potentially activated polarization reorientation around relaxor MPB in complex perovskite

Improving piezoelectric performance is always favorable to further enhance the sensitivity and accuracy of piezoelectric devices. Here, a complex piezoelectric system of Pb(Ni_1/3Nb_2/3)O₃-Pb(Yb_1/2Nb_1/2)O₃-Pb(Hf_0.1Ti_0.9)O₃ is designed and investigated in detail. Optimized piezoelectric response of ～ 880 pC/N is achieved at the composition of 0.51PNN-0.09PYN-0.40PHT. The characterization of TEM and In-situ high-energy synchrotron diffraction indicate that nanodomain growth and microdomain switching occurs in succession at around coercive electric field. Most interestingly, the coexisted tetragonal and rhombohedral-like phase transforms into multiple monoclinic-like phases with polarization vectors aligned as close to the electric field direction as possible under the strong electric field. The enhanced polarization instability in this complex morphotropic phase boundary sample should be ascribed to the strong local heterogeneity. The novel polarization rotation behavior found in this work would be important guidance for designing high-performance piezoceramics.     

Semantic word shifts in a scientific domain

Understanding semantic word shifts in scientific domains is essential for facilitating interdisciplinary communication. Using a data set of published papers in the field of information retrieval (IR), this paper studies the semantic shifts of words in IR based on mining per-word topic distribution over time. We propose that semantic word shifts not only occur over time, but also over topics. The shifts are examined from two perspectives, the topic-level and the context-level. According to the over-time word-topic distribution, stable words and unstable words are recognized. The diverging and converging trends in the unstable type reveal characteristics of the topic evolution process. The context-level shifts are further detected by similarities between word vectors. Our work associates semantic word shifts with the evolving of topics, which facilitates a better understanding of semantic word shifts from both topics and contexts.     

Investigation of flame spray synthesized La1-xSrxCoO3 perovskites with promotional catalytic performances on CO oxidation

To enhance the activity of catalysts for CO removal, the perovskite-type catalysts La_1-xSr_xCoO₃ (x = 0, 0.2, 0.4, 0.6, and 0.8) with different Sr²⁺ doping amount were synthesized by flame spray synthesis (FSS) method. The perovskite-type catalyst synthesized by FSS has a much larger specific surface area (SSA) than that prepared by other conventional methods. The SSA of catalyst increases with the increase of Sr²⁺ doping amount and the SSA of La_0.2Sr_0.8CoO₃ reaches 31.65 m²/g. Compared with other conventional methods, FSS method significantly improves the activity of catalyst and makes it close to the performances of catalysts with surface modification. The substitution of La³⁺ by Sr²⁺ promotes the generation of secondary phase Co₃O₄ and SrCO₃. The catalytic activity of La_1-xSr_xCoO₃ increases with the addition of Sr²⁺, which results from the increasing active sites and oxygen vacancies. Interestingly, La_0.4Sr_0.6CoO₃ performs the highest activity for CO oxidation and the CO conversion reaches 50% at 148.6 °C and 90% at 165.9 °C. The oxidation of CO over La_1-xSr_xCoO₃ catalyst may follow a combination of MvK and L-H mechanisms according to the experimental results of H₂-TPR. Moreover, the catalyst exhibits good catalytic activity in consecutive oxidation cycles. In consecutive oxidation experiments with La_0.4Sr_0.6CoO₃, the CO conversion reaches 50% at 168.8 °C and 90% at 197.8 °C in the eighth oxidation cycle. These results prove that FSS method can further improve the activity of catalysts and is suitable for the preparation of efficient catalysts.     

11B and 15N solid state NMR investigation of a boron nitride preceramic polymer prepared by ammonolysis of borazine

A poly(aminoborazine), precursor for hexagonal boron nitride (h-BN) obtained by reaction of borazine B₃N₃H₆ with ammonia, and its pyrolysis derivatives have been extensively characterised by ¹⁵N and ¹¹B MAS NMR. The various B and N sites have been identified according to their first neighbouring atoms, as well as to the second ones in the case of ¹⁵N, and have also been quantified. This study demonstrates that a suitable choice of NMR techniques together with the use of isotopic enrichment can lead to a large improvement in spectral resolution, which allows a better understanding of such complex BN preceramic polymer structures and permits to follow the polymer-to-ceramic transformation.     

Structures and electrochromic properties of Ta0.3W0.7Ox thin films deposited by pulsed laser ablation

Electrochromic materials based on mixed metal oxides are of growing importance since improved durability, coloration efficiency and chemical stability, as well as a desirable neutral color could be accomplished in those multicomponent films. In this work, we have used the pulsed laser deposition technique to deposit thin films of Ta_0.3W_0.7O_x on ITO-coated glass substrates in reactive O₂ gas environment at a substrate temperature range of 200 to 700 °C. X-ray diffraction results showed that Ta_0.3W_0.7O_x films begin to crystallize to a cubic phase at substrate temperatures near 700 °C, while films with amorphous structure were obtained at lower substrate temperatures. The lattice constants of the polycrystalline films are similar to those of stoichiometric Ta_0.3W_0.7O_2.85 bulk materials. Optical transmittance of Ta_0.3W_0.7O_x films decreases as the O₂ pressures during deposition decreasing from 5.32 Pa to 0.13 Pa. Electrochromic properties of the Ta_0.3W_0.7O_x films were evaluated in 0.1 M H₃PO₄ electrolyte and the results were compared to those of WO₃ and Ta_0.1W_0.9O_x films deposited also by pulsed laser ablation. The results have demonstrated that the addition of one metal oxide (e.g., Ta₂O₅) into another (e.g., WO₃) is an effective way to alter the electrochromic properties of the individual constituents.     

An efficient face segmentation algorithm based on binary partition tree

This paper presents an efficient face segmentation algorithm based on binary partition tree. Skin-like regions are first obtained by integrating the results of pixel classification and watershed segmentation. Facial features are extracted by the techniques of valley detection and entropic thresholding, and are used to refine the skin-like regions. In order to segment the facial regions from the skin-like regions, a novel region merging algorithm is proposed by considering the impact of the common border ratio between adjacent regions, and the binary partition tree is used to represent the whole region merging process. Then the facial likeness of each node in the binary partition tree is evaluated using a set of fuzzy membership functions devised for a number of facial primitives of geometrical, elliptical and facial features. Finally, an efficient algorithm of node selecting in the binary partition tree is proposed for the final face segmentation, which can exactly segment the faces without any underlying assumption. The performance of the proposed face segmentation algorithm is demonstrated by experimental results carried out on a variety of images in different scenarios.     

TCP self-clocking and bandwidth sharing

We propose a simple queueing model for TCP transfers sharing a bottleneck link and examine its behavior when the buffer at the bottleneck is large compared to the bandwidth-delay product. This model explains some behaviors of TCP that have already been observed, and predicts other behaviors that are new. We present measurements that demonstrate these behaviors in the current Internet.